May 15, 2021
The best place to start is to figure out the square footage of the area you are trying to light. For high-light plants like tomatoes you will want to achieve around 40 watts per square foot for optimal growth and fruit production. For low light plants, and small leafy plants like herbs and lettuce, you will only need to achieve about 25 to 30 watts per square foot. When figuring your area don't necessarily go by the actual size of the room. You will want to measure only the plant area that you will be growing in. In other words, if the grow room is 5 x 5, but you will only be growing in a 3 x 3 area there is no reason to get a light big enough for the whole room. Using that as an example, you have a 5x 5 growing area so you must figure out how many watts you will require to light that area. We will be growing tomatoes so we will want to achieve 40 watts per square foot.
Width x Depth = Square Feet, e.g. 5 x5= 25 sq. ft.
Watts x Square Feet = Desired Wattage, e.g. 40 x25 = 1000 watts
We will just round the 900 watts up to 10000 watts. So, we know that we will be in the market for a 1000 watt LED grow light...
The center Power Hub allows for hard mounting the LED bars to the Hub or remote mounting during multi-level grow environments when every inch counts.
The iL9x 1000W from ILUMINAR has a tuned Full Spectrum array and engineered for vegetative and flower cycles that require high μmol performance at a lower clearance to the canopy.
The iL9x 1000W LED is a full spectrum array designed for veg and flower cycles that require a high μmol performance at a lower clearance. Ideal for many settings from commercial facilities to hobby gardeners. Enjoy the flexibility of hard mounting the LED bars to the center mast or remote mounting the bars directly to the rack for multi-level grow environments where every inch matters.
The iL9x is now available in a higher efficacy giving the grower higher µmol per Joule output for the same wattage used. The ILUMINAR iL9x 1000W LED fixture delivers more when you need it most.
The iL9x comes in either 120-277 Volt or 200-480 Volt.
Emitter Type: Osram SMD LED Diodes
Input Power: Smart Sensing™ 120V to 277V & 347 to 480V
Mounting Height: 6”-12” to top of Canopy
Emitter Cooling: Passive / Extruded Case
Dimming / Controllable: 0-10V Controllable
Light Distribution +/- 5%: 125º
Waterproof Rating: IP65 for Damp/Wet Conditions
LED Lifespan (90% of Life): 55,000+ Hours
Power Factor: > 90%
Height: 5 in / 129mm
Width: 39.5 in / 1003 mm
Length: 42in / 1067 mm
Weight: 40.96 lbs | 18.58 kg
ABSOLUTELY LARGE COVERAGE -- ECOM 1000W With total 2400pcs LED chips, this 8-bar LED grow light offer a extremely large irradiation area for plenty of plants. Coverage 6x6ft for veg, 5x5ft for bloom. Lightweight aluminum alloy material, detachable light bar and daisy chain design. Perfect for indoor, greenhouse planting, personal and commercial growth. Use only one light for 4'x4', 5'x5' or 6'x6' tent.
DIMMABLE AND DAISY-CHAIN FUNCTION-- Design for full plant life cycle. The light intensity can be adjusted by knob. With daisy-chain design, one light can control the intensity of the other 10 lights by dimmer at the same time.. The plant growing light includes 1536 pcs LM301B 3000K leds, 768 pcs LM301B 6500K leds, 96 pcs OSRAM 660nm deep red leds..
HIGH EFFICIENCY Samsung LEDs -- The Samsung LM301B chip LEDs used in this LED grow light are professionally customized and produced with the latest technology. Higher light intensity, lower speed of light decay and higher PAR values than ordinary lamp beads. It provides 2.5 μmol/J high efficacy .Maximize yield and optimal quality.
LOW HEAT AND NOISE FREE-- Saving up to 50% energy and 30% cooler than other grow lamp. Consuming only 650W with 2400 LEDS! The latest aluminum radiator has special surface treatment that doubles the heat dissipation area. IP65 Waterproof. High power, low heat and low failure rate grow lamp. No fan, no noise.
ECOM1000W PPFD