August 19, 2021
If you are looking to start out with indoor growing (or growing cannabis in particular), you may be in the market for the best LED grow lights to produce the best results possible. It is important to realize that not all LED grow lights are created equally and while they share a common name, they do not necessarily function to get the job done which you require.
It can be a little overwhelming when you are trying to decide which LED lights are the best since there are so many choices, however, this guide will walk you through key features to look for and give reviews on some of the best LED grow lights available, so you can be better informed when deciding.
You need a certain amount of light for uniform, stable, and fast plant growth. The wattage of the bulbs is indicated in watts. The more watts, the more light the lamp has. You need to know what wattage LED bulbs require to grow your plants. Experienced gardeners state that 30 to 50 watts of power per square foot of area is required.
At the initial stage of growing seedlings, you should place Phyto-lighting at a distance of 15–30 cm from the seedling. As the plant grows, the light source should be raised to a similar height, which you can achieve easily due to an adjustable mount. The seedlings should be in resting and lighting modes for an equal period of time.
ECO Farm ECOM Bluspec 650W LED Grow Light with Samsung LM301B and OSRAM Chip
Features:
The ECO Farm LED Grow Light delivers growers and indoor gardeners the ability to stimulate pre-visibility, boost yields and increase quality all season long. The grow light utilizes all highest-quality, High-Efficiency Samsung, Osram LEDs. The light intensity is higher, the light attenuation is smaller, and the lumen and PAR values are better than ordinary LED. It enables you to obtain a 30% higher output than HPS. The best active heat management in the industry, crucial to maximizing LED life, efficiency, and spectrum stability
Largest heat sink among LED grow lights for superior cooling and increased LED life,ultra-efficient LEDs 70,000+ hour rated lifespan. This durably constructed LED grow light has 8 bar technology to deliver smooth, even light over the canopy. Remotely mounted driver technology allows for quicker and more efficient heat dissipation. In addition, the plant grow light uses an advanced waterproof power supply, installed in The outside of the lamp is easy to replace. This kind of growth lamp is a full-period lighting solution suitable for all growth environments (including humid environments), and is an ideal choice for greenhouse or indoor lighting.
Spectrum: 3000K+6500K+660nm+460–470nm+ 450nm
LED Chips:
LM301B 3000K 6500K 279pcs x8
OSRAM 660nm 12pcs x8
Osram 470nm 2pcs x8
Osram 450nm 1pcsx8
LEDs: 2352 Total LEDs
Efficacy:2.7umol/J @277AC
AC Input Power:650W @120V AC 630W@277V
PPF:1715 umol/s
Grams Per Watt: up to 2.0
Lifetime: >50,000
Fixture Dimensions: 113*110*4 CM
Weight: 15kg
Coverage Footprint:
Veg: 4' x 4' area (Up to 7' x 7' area)
Flower: 4' x 4' area (1.2m x 1.2m)
Max: 5' x 5' area (1.5m x 1.5m)
Hanging Height : Flower: 6"-24"
Warranty : 5-year standard warranty
Recommended for: Grow Tents, Grow Rooms, Commercial Grows.
Mars Hydro FC 6500-H Commercial Grow Light Full Spectrum LED Grow Lights
Features:
The Mars Hydro LED grow light with 2688pcs Samsung LM301B & Osram 660nm Diodes, boasts the market-leading efficiency of 2.8 µmol/J, Max 2.5g yield per wattage with 30% higher Average PPFD, achieve 50% higher yield & quality compared with the old lights! Only consumes 650w perfect light for 4x4ft flowering. It is perfect as commercial LED grow lights, FC6500 dimmable grow lamp with daisy chain, up to 15 lights connected, master light controlled offers great convenience to your planting! IP65 Waterproof wide 8-bar offers even & broad canopy coverage, maximizes grow space, flexible 180-degree design, ideal for home & vertical farming. 8 passive-cooled bars, aluminum heat-sink, fanless zero noise design, equipped with dismountable finest quality Inventronics Driver, equals unmatched performance in heat dispersing & lifespan.
High PPF: 2.85 umol/J
Up to 2.5 g/W
DLC, UKCA, ROHS & ETL listed
Samsung LM301H & Osram 660nm LEDs
50% higher PPFD compared to HID lamps
Balanced, full-spectrum light output
50% lower power consumption compared to HID lamps
8 passively-cooled bars provide broad coverage for full-cycle growth
Dimmable
Removable Moso driver
5-year Manufacturer’s warranty
IP65 waterproof
Here is a list of the important factors that you should consider when getting a LED grow light for your indoor garden:
This is important to keep in mind as a light output that is too low or too high can drastically affect your plants. In other words, if they receive too little or too much light, it could end up making them not grow correctly. Because of this, make sure to pay attention to the light output of an LED fixture.
Energy efficiency and actual wattage
The energy efficiency will be determined by the wattage of the light you will choose. The wattage is directly proportional to the amount of energy to be consumed. Therefore, the lower the wattage, the lower is the amount of energy that it consumes. During the vegetative stage of growth, plants don’t need as much light as they do during flowering. A fixture that lets you turn off LEDs or dial back and customize their intensity when they are not needed will save you money in electricity costs.
Color
If you are thinking that colored LED lights serve as a decoration or to make your garden fancier, think again. The colors of your LED grow lights actually serves a deeper purpose. The color of the light dictates the wavelength that it produces, measured in nanometers. This defines the spectrum of the light. During the vegetative phase, blue light is more beneficial. Meanwhile, red light is needed during the flowering stage. You can either choose to be Pro white light or pro colored light. Growers consider one advantage of white lights. It is that the white light is very similar to sunlight or natural light. Also, your plants look natural under white light, so it is much easier to inspect them and to notice any discolorations, and other problems. Inspecting your plant can be quite difficult under pink light.
Coverage
Coverage is an important consideration, especially for large and wide indoor gardens. You have to make sure that every plant gets the right amount of light. Also, make sure that the light generated can cover the entire garden area. Otherwise, if some plants are not reached and could not get enough light, they won’t be able to maximize the benefits of having LED grow lights.
Cooling System
When used extensively or for a long period of time, LED grow lights can be prone to overheating. That is why an efficient cooling system is necessary. It is important to have cooling fans to provide ventilation in order to prevent too much heat. Having a good cooling system prolongs the life of your LED grow lights while also ensuring the health of the plant.
A good cooling system also prevents overheating. This will not only prevent your LED light from becoming damaged but helps keep your plants safe from burning.
Spectrum
Lights that have a customizable spectrum feature, give you complete and full control. The advantage of this is a lower electricity bill. Plants don’t need as much light during vegging as they do during flowering and they need even less during cloning. Being able to dial back the number of lights means you use less power. A downside of this is that switching modes on an LED light will not cause an overly long period of stalled growth, but you can count on a few days’ delays. They can also be a bit confusing to operate for some. LED lights with only one mode are obviously much easier to operate.
Even if you are confident that you have the best and greatest grow lights. It is still very important that you take care of them. Still, proper care and maintenance should be given. Maintaining and taking care of your LED grow lights is important. As it will be vital in maximizing its performance and prolonging its lifespan and service.
Some of the most important things to keep in mind:
Make sure that the LED grow lights are properly installed, excellently wired, and connected. Pay attention to wirings and get the proper electrical materials. This will not only be beneficial for your cannabis but for your safety as well.
Keep your grow lights squeaky clean. Use a glass cleaner to keep it clean and in perfect condition. Before doing this, however, make sure that the light is turned off and unplugged for your safety.
Make it a habit to wipe the lights or dust them off. Accumulation of dust on the surface can affect the intensity of the light emitted. And it might affect the growth and development of your cannabis in the long run.
The right position and location of the LED grow lights will also be a critical concern. Place it in a room where there is not too much moisture.
LED lights are a great addition to add to your growing space for a variety of reasons. Not only are they energy-efficient, but they work quickly at helping your plants to grow.
You can easily start an indoor garden with one or two lights if you want to keep it simple. This guide is designed to help beginners all the way to advanced growers in finding the best LED grow light for their own specific needs and plants. If you lookout for the key features outlined here, you will be sure to find the most suitable LED grow light for your indoor growing experience. Hopefully, you have found answers to your questions about LED grow lights and learned a little about the installation process as well. Please feel free to leave a comment or question, we always enjoy our reader's feedback.
June 27, 2024
When choosing Best LED Grow Lights, you should also consider the durability of the lamp, energy efficiency and whether it can meet the light needs of specific plants. For example, the LED plant growth lights provided by Philips Lighting are designed for specific crops to promote uniform growth and improve quality and yield.
June 20, 2024
June 15, 2024
On Amazon, hot growth light types include LED Growing Lights, which have a variety of functions and features such as automatic on/off timing, red and blue LED light combinations, multiple dimmable modes, and flexibility for indoor potted plants or indoor gardens.