EZTRIM Trimming Machine VS TrimPro TrimBox Leaf Trimming Machine

Many first time growers don’t know that trimming the buds after they’re harvested is a very important part of the process of cultivation. For a good smoke you need to remove the leaves that are left in the buds, this will better your bud’s appearance and flavor.

Wet Trimming VS Dry Trimming

Although there is an accepted best time to harvest plants, the best time to trim and manicure your plants is debated among growers. There are two ways to manicure them: wet trimming, and dry trimming. Some prefer wet trimming while others prefer dry trimming. Both are correct in certain circumstances, it all depends on things like time and the environment of the curing process, so it’s up to you do decide which one will work best.

Wet Trimming
Trimming your plants before drying is known as a “wet trim” because the leaves are still wet during the trimming process. This method is arguably the most preferred method for several reasons. Wet trimming gives you better access to your buds, the small leaves will be out due to their moisture content, making their removal an easy process.

Trimming this way will also result in faster drying because the extra plant material will be trimmed off.
 
Drying buds extremely fast will leave them smelling like hay. Even though they will dry faster, you should not accelerate the process even more (e.g. by applying heat or fans facing directly onto the buds).

Wet trimming is better when:

Your relative humidity is above 60%, and removing the excess plant material before drying prevents mold.
You have a small drying space, removing the excess plant material will let you fit more buds in the same space.
You want buds to dry more quickly, trimming leaves before drying will remove the excess moisture.

Dry Trimming
Dry trimming occurs after the drying process, this process can take 10–15 days, in this period buds will lose most of their moisture. Many growers prefer dry timing because it tends to be easier and less messy. Wet trimming can leave your hands and shears covered in resin very quickly, you will need a lot of cleaning breaks before finishing.

Trimming Guide: Dry trimming plant

Either way, both methods work well and you should decide which one you prefer by experimenting and seeing whats is better in your situation.
 
Dry trimming is better when:

You’re not worried about mold.
Your relative humidity levels are below 45%.
You want buds to dry more slowly (drying buds too fast may cause them to smell like hay).

EZTRIM Trimming Machine

Features:

The Ez Trimmer removes unwanted leaves from your flower and is the only solution that can deliver trim quality which surpasses manual methods. The key to the Ez Trimmer’s superiority is that it allows the user to adjust multiple variables in the way you trim in order to adjust for wet and dry product, as well as different strains, sizes, and growing methods. The EZ Trim Machine comes with both a dry trimming grate as well as a wet trimming grate, giving you the ultimate control of how to process your flower. The Ez Trimmer is not only quiet and lightweight, but also features the following unique adjustable controls: Flower Movement through Airflow and Suction.

TrimPro TrimBox Leaf Trimming Machine

Features:

Designed to easily attach to any workbench, TrimPro trimmer is a lightweight wet bud trimmer that adapts to your workspace. Capable of pruning up to 1.5 pounds of buds, the Trimbox is the perfect partner for any small or home grower who wants to have a bud pruning system. The Trimbox comes with a stand and clip and can be used right out of the box. This machine is easy to use, you just move the buds onto the Trimbox grill while you swirl the material. Like other Trimpro machines, the Trimbox is easy to maintain and quick to clean.

What Should You Do with Trimmings?

Trimming might be a lot of work, but it leaves you with quality buds. It also leaves you with what many consider waste.

Don’t throw away the scraps just yet. There is a lot you can do with them. You can use the leaves with higher levels of THC (sugar leaves) to make products such as edibles. Fan leaves that have lower THC levels are useful for creams or even as herbs.

Trimming by Hand vs. Trimming Using a Bud Trimmer Machine
Hand trimming vs. machine trimming? It’s the question that plagues many growers. Trimming by hand has been the norm for centuries, but people are looking to streamline the process.

That’s where bud trimmer machines come in. They offer growers an alternative to a very mundane, time-consuming method.

Quite frankly, choosing your trimming method comes down to personal preference. The main factor you should consider is the harvest size. The main reason growers might opt for a bud trimmer machine is to save time.

If you have big harvests, one of these products will cut down on trimming time. Those with smaller farms don’t necessarily need to invest in these machines. Continuing to trim small harvest by hand is reasonable. Plus, it helps growers control the quality of their final product.

Why Should You Trim?

Trimming might be an extensive process, but it is well worth the results. Some reasons why you shouldn’t skip this critical step include:

More Visually Appealing Buds
Imagine pictures of buds in magazines or advertisements at a dispensary. They look perfect as they are, all uniform and free of excess leaves.

You won’t find buds this beautiful right off the plant. To look this good, you must trim them carefully.

Higher THC Content
Trimmed buds have a higher overall THC content. The reason is that you are removing the surrounding leaves that have high sugar and low THC levels.

More Pleasant Smoking Experience
Because they are much thicker than the actual flowers, plants’ leaves don’t wick away moisture as well. The result is a harsher smoking experience.

Cured and trimmed buds, however, have a more even moisture content. The result is a pleasant smoking experience with enhanced natural flavors.

Why Isn’t Everyone Using Bud Trimmer Machines?
So, why isn’t everyone using bud trimmer machines? They seem to offer the perfect solution to a common problem. Additionally, they are readily affordable and accessible.

Some arguments against bud trimmer machines include:

Standardized
There are many different strains of plants. Their flowers all have varying shapes and densities. Some growers, therefore, claim that each bud requires its own unique, by-hand trimming approach. They feel that bud trimmer machines are too standardized and don’t consider each unique flower.

Quality
Some growers also claim that machines are too powerful. They don’t offer the same delicate touch as by-hand trimming does.

There is some truth to these claims; poor-quality machines can ruin your buds. As long as you get one with gentle rotations and non-stick features, the manicuring process will go smoothly.

Conclusion

The concept of implementing the right bud trimmer for your farm no longer has to be a scary thought that keeps you up at night. Innovations in industry-driven trimming technology have caught up with cultivator demand, and it’s time to take a serious look at options for your business. Several trimmers in the market can help you maintain the required standards and increase your productivity when it comes to plants trimming. With proper trimming of the buds, you can maintain the flavor content and the taste of your final product.

Also in News