| /


The NugSmasher PRO is a 20 Ton Pneumatic (or manual) operated Rosin Press manufactured and assembled in Corona, CA. It is constructed of solid steel with T6 6061 Aluminum pressing plates and control panel bezel. The frame is fully fabricated and CNC machined in-house.

Platens are installed with machined alignment assemblies on both sides of the lower plate. These assemblies allow perfect alignment every time. All platen styles are setup to accommodate 3 heating elements in each of the top and bottom plates. Standard installed heaters are 160W ea (480W per plate total), which allows the unit to warm up to useable temps in as little as 5 – 10 minutes and also allows the unit to operate on less than 9 amps of power.

The NugSmasher PRO makes use of simple, yet reliable PID controllers with an accuracy of 0.2%. Top and bottom plates are individually controlled to ensure you are getting the right temps throughout the platen. Temperature can be set to read in Fahrenheit or Celsius.

Nugsmasher Pro can be used pneumatically with compressed air. Any air compressor with a working pressure between 90-120 psi and has a 3 gallon or larger tank works great. Recommended to be used with a water sperator attached to the compressor and inlet size is 1/4 in -18 npt into machine.

 

  • Interactive Extraction Brain
  • 10.1-inch touchscreen
  • Wi-Fi and Bluetooth-enabled
  • Firmware updates available
  • Pressure and Temperature control display
  • Built-in Timer 
  • Customizable settings
  • Solid Steel construction
  • Applies up to 20 tons of pressure
  • 7 x 10-inch heating plates
  • 6 heating elements at 160 watts each
  • With options for pneumatic or manual control
  • Limited lifetime warranty
  •