Indoor Grow LED Grow Light

Along with nutrients and watering, light source is one of the most important factors to consider when growing houseplants indoors. You should provide them with adequate lighting on a daily basis and pay attention to the light spectrum.

We’ll give you more guidance in this article, but first, here are the best LED grow lights for indoor plants, handpicked by our experts.

What are Lumens? How Many Lumens Should I Choose?

Lumens are an important consideration when selecting a grow lamp or lightbulb. The wattage of a light bulb is measured in this way. Light output is measured in “lumens,” and the term refers to the amount of emitted light.

Remember previously when we talked about the different light intensity levels? Each category requires a certain amount of light:

High Sun: 7000 lumens per square foot

Part Sun: 5000 lumens per square foot

Low Sun: 2000 lumens per square foot

Per square foot is what you’ll observe in the pricing section. The truth is, you can’t just buy a 7000-lumen lightbulb and be done with it. Lumen output begins to drop as soon as they depart the bulb. That doesn’t mean that the amount you start with is the amount your plant is soaking in.

Before buying a light, you can use the following calculation to figure out how many lumens it needs to have: If you’re a mathematician, use this equation:

Lightbulb Lumen Output ÷ Distance in Ft. to Plant² = Light Intensity

That was the last thing on your mind, weren’t you? If you square the distance to your plant, you’ll be alright.

Spider Farmer SE5000 480W Full Spectrum LED Grow Light

Features:

This Spider Farmer LED grow light features a uniquely designed 6 extended LED strips that provide more even canopy coverage, especially on the outer edges of the growing area. With 1680 SAMSUNG LM301B diodes, the SE5000 Led Grow Light consumes 480 watts at 1333 umol/s, achieving an impressive PPE of 2.75 umol/J, covering a high yield full-cycle growth of 4'x4'. The full spectrum (380–410nm, 660–665nm, 730nm, 3200–4200K, 4800–5000K) is ideal for vegetable flowering to suit every stage of the plant cycle. The dimmer knob is ideal for growers to adjust the light intensity for different growth stages. The daisy chain feature allows you to connect up to 30 spider farm grow lights — dimming multiple lights at the same time.

GrowPros HM480 LED Grow Light

Features:

This GrowPros grow light, with an increased lifespan over traditional grow light sources, cultivates healthier, happier plants. The HM480 Series produces 1.8 gram per watts (dried) of crop yield. A high-PPFD and PAR indicates high efficacy, or light output produced per expenditure of unit of power. Generating about 50% more in energy savings over traditional HID and HPS light sources, the HM480 gives you meaningful savings over time. Will not produce the same results without CO2 supplementation. A full-spectrum LED rack lighting solution designed for commercial indoor and greenhouse applications, enabling control over the plant cycle from the vegetative stage to the flowering stage.

Factors You Must Consider When Buying LED Grow Light

High-Efficiency Diode
When most people are looking for LED grow lights, they will focus on the appearance of the grow lights. However, the LED diode itself is more important than the appearance of the grow light. LED diodes are light sources, so having high-quality LED diode is a must. One thing you need to be aware of is that there are many fake LED chips on the market, and some LED grow lights claim that their products use Samsung LED diodes, but this is not the case. In addition, the diode model of LED grow lights is also intuitive and important.

For example, Samsung’s 3030 (LM301) LED diode series includes LM301H, LM301B and LM301D models. Both the LM301H and LM301B are true top-of-the-line LED diodes, The LM301B was released first, and its efficiency also stands out among all white LEDs — 2.92 µmol/J at 65 mA. Compared with LM301B, the efficiency of LM3301H is improved by 0.18 µmol/J. Therefore, when you buy, you need to pay attention to choose the most suitable series for planting — Samsung 3030 (LM301) series chips.

Uniform PPFD

What Is PPFD?
PPFD stands for Photosynthetic Photon Flux Density, a measure of how many PAR photons fall into a particular area in micromoles per second per square meter.

Uniformity of PPFD
So what does the uniformity of PPFD mean? Quite simply, that is the uniformity of the number of photons present at a specific density. And the more evenly the light covers the branches and leaves of your plants, the better yields you will get. If you choose a grow light with uneven PPFD coverage, it will result in inconsistent growth rates between exterior and interior of your plants. Therefore, you need to use LED grow lights with uniform PPFD that evenly cover the entire growing space. Most grow light brands generally have PPFD diagrams attached, which you can view and identify.

Full Spectrum
Outdoor plants grow under natural sunlight, and every color in the sunlight spectrum is a catalyst for plant growth. Therefore, the best grow lights should have a full spectrum to best mimic natural sunlight and optimize plant growth. Across the spectrum, each wavelength (color) has a different effect on plant growth. Blue and red light are the most conspicuous colors, as blue promotes the thickness of the plant during its vegetative stage. Red light helps plants stretch and bloom during flowering. It is not difficult to see that choosing a full-spectrum LED grow light with both blue and red light is your best choice.

Dimming Function
LED grow lights consume less energy than other types of grow lights, especially dimmable LED grow lights, saving electricity can save you money and ultimately provide better results, they allow you to tailor the light your plants receive according to the different needs of each stage during their growth, because only the specific light that is suitable for each stage of growth can encourage plants to thrive. The light adjustment can be achieved by a dimmer, and the brightness range is generally 10%-100%. Dim the lights can also give your plants a break, after all not every stage of plant growth is suitable for high-intensity lighting throughout a day, which helps them stay healthy and strong.

Conclusion

Plant lights are an important part of indoor gardening. By learning about the different types of grow lights and how to use them, you can create a healthy environment for your plants to grow. Whether you’re new to growing plants or have been growing for years, using grow lights is a great way to help your plants thrive.

Growing houseplants sometimes is not easy. Enough sunlight, water, air, fertilizer, etc. are necessary for indoor plants. Grow lights mimic natural sunlight and can be of great help. If you plan to build your own indoor garden, read our review below to find out the perfect products available in the market.

Why LED Is The Best Grow Light for indoor plants?

There are several indoor grow lights that can be used for planting. However, most farmers prefer to use LED. Research shows that LED is the most preferred lighting method among farmers in North America. Here are some benefits of LED Grow Light;

Energy-saving: With LED, you can save anywhere from 50–70% of energy. They conserve energy and are also able to keep the constant intensity of the light. The light does not fade with time.

Full-spectrum: LEDs have a full spectrum that can compare with the radiation spectrum of natural sunlight. This is one of its selling points.

Reduced heat emission: LEDs produce the least amount of heat of all grow lights. They produce enough light intensity while reducing heat emission.

Durability: One of the key benefits of LED plant lights is durability. Most LEDs have a life span of 3–4 years when properly maintained. You can get almost 50,000 hours of light.

Environmental friendly: LEDs do not contain mercury or any other harmful gas that can affect the growth of the plant. They are recyclable and very safe.

Better plant quality: With the absence of UV rays, the quality of plants is higher.

Low maintenance: Besides being easy to install, LEDs have very low maintenance. After installing, you can focus on the growth of the plant. All the regular issues in traditional are absent. So, you can save more money.

ECO Farm ECOD Samsung UV+ IR 1000W Dimmable LED Grow Light

Features:

The ECO Farm LED Grow Light is powered by Samsung Full Spectrum LEDs that drive a wide spectrum from 395nm to 730nm and produce 144597 Lumens. The full spectrum coverage gives better results. Available in 3000K and 6500K. Full-spectrum light with higher intensity in the 395–730nm spectrum has been shown to perform better than the targeted spectrum for general use. The ECO Farm Samsung LED grow light produces a 1000W PPF output of 2524.5μmol/s and a PAR efficacy of 2.8umol/J making this fixture incredibly efficient compared to other commercial fixtures. LEDs generate far less heat than HPS and other HID lamps making them perfect for horticulture. Lights can be installed much closer to the plants themselves getting them all the light they need and increase your harvest. Less heat also means a lot less power used for cooling your grow area. Stack that with power saving on the light itself for a huge drop in your power expenses.

Spectrum King Phoenix 1050W LED Grow Light

Features:

Spectrum King’s Phoenix 1050W LED Grow Light is a grow lighting beast that unleashes 1050 watts of sun-like light in areas up to 6' x 6', unleashing the ultimate output for your grows. Designed to hang high, the Phoenix 1050 recreates the sunniest summer days for plants that never seem to get enough light. SK Cryo-Therm cooling technology enables an ultra-thin profile that allows maximum airflow and minimizes microclimates. Optimized for single or multi-tier planting near the canopy. For growers who need the biggest, brightest LEDs, the Phoenix 1050W is for you.

What Factors Should You Consider When Buying LED Grow Lights?

Having a wide array of LED grow light models from different manufacturers is a welcomed development. It means growers have a lot of options to choose from. However, it also makes it tricky to make the right choice. This section outlines the important factors, and features you should look out for when shopping for your next set of LED grow lights.

1. Price

The truth is the quality of LED grow lights you can get depends on how much money you have to spend. While these devices are not exactly cheap, growers should set a realistic budget and work with the same while shopping. The goal here is to get lights that offer the best value for their price. A good LED grow light may cost between less than 100 USD and up to 1,000 USD, depending on the specifications. For example, a full spectrum LED grow light will cost more than models without UV lighting. Other factors like the diode brand, light intensity, and warranty length may also contribute to the overall cost of any grow light model. However, you will most likely find cost-effective options that fall within that price range irrespective of what you are looking for.

2. Light Intensity

Light intensity simply means the amount of power you get from a grow light. Growers tend to assess the light intensity of a grow light by its wattage. But this is not entirely accurate. Other specifications like the Photosynthetic Photon Flux Density (PPFD), Photosynthetic Photon Flux (PPF), and efficacy all contribute to the overall light intensity a LED grow light delivers. The Photosynthetic Photon Flux (PPF) of a grow light is the amount of light it produces per second and is measured in umol/s. It is the official unmanipulated measurement of the full amount of light any LED grow light can produce. The Photosynthetic Photon Flux Density (PPFD) is slightly different. It estimates the number of photons that reaches a square meter of the grow area per second. Measured in umol/m2/s, this metric shows how well the plants use the photons from the light source. Various plant types have their own recommended PPFD. It is best to go for grow lights that efficiently and equally distribute light across the grow area. The last contributory factor — efficacy — describes how many photons you derive on the same power consumption.

3. Spectrum

The spectrum is another essential factor to watch out for when you want to buy grow lights. Not all LED grow lights are full spectrum, but it is best to go for full spectrum models. Full-spectrum light comprises five different sections — the UV light, blue light, visible PAR light, red light, and the far-red light. Having all wavelengths of light means a single full spectrum LED grow light can contribute to all the stages and aspects of plant growth. In addition to their efficiency, adopting full spectrum LED grow light makes the plant appear more natural, making it easier to discover and monitor plant diseases and pests. The higher amount of green light in a full spectrum grow light translates to higher PPFD, which is great for light-hungry medical plants. That way, they can absorb more green light and increase yield.

4. Coverage Area

Knowing the precise dimensions of your growing space before shopping for a LED grow light is important. For example, hobbyist growers grow in 5 square meters or smaller areas, while commercial growers can go several hundred square meters or even thousands in some cases. The smaller growing areas can rely on less powerful lights. Still, anything larger than 5 square meters will require multiple large, powerful lights to cover all the edges and corners and ensure an even light intensity over the canopy.

Conclusion

LED grow lights are becoming more and more popular due to their energy efficiency and low heat output. While they may not be as powerful as HID lights, they still produce great results and are a great option for growing space.

There’s no better decision than investing in high-quality grow lights, especially if you want something that will make your life easier. In order to get the best product for your needs, the quality of your grow lights still matters. There are tons of grow lights on the market. However, it can be difficult to find the right one.

The market is flooded with plant lights, all of which are best to say. However, not all of these brands are worth the money. You can only get the best value for money from a few brands. We’ve put together a list of the top products below to help you find the best grow lights for your requirements. You can trust them to deliver on their promises as these are the most reputable and trustworthy grow lights on the market right now.

Benefits of Led Grow Lights

LED grow lights have been shown to be more efficient than traditional grow lights, and they also last longer. They give off very little heat, so you don’t have to worry about them cooking your plants. And because they produce such a concentrated light, you’ll need less of them to get the job done.

The best LED grow lights can help save on energy costs while still providing your plants with high-quality light. These types of bulbs also tend to generate less heat than other options, so you don’t have to worry about cooking your plants.

ECO Farm ECOD Samsung UV+ IR 800W Dimmable LED Grow Light

Features:

This ECO Farm LED grow light adopts the top quality equivalent diodes, producing a 800W PPF output of 2019.6 μmol/s and a PAR efficacy of 2.8umol/J, ideal for home and vertical farm planting. This full spectrum grow light meets the lighting requirements of every stage during the plant’s growth cycle. It consists of 660nm of red light, IR, 3000K and 6500K of the white light spectrum, providing plants in all stages from veg to flower with everything they need in the natural sunlight.LED plant lights enable cultivators to produce density buds, the 8-bar configuration allows widely application in the home grow (grow box and grow tents), climate rooms, commercial growing (horizontal and vertical), greenhouse cultivation, vertical racks, hydroponics.

Grow Light Science PROGROW 850 850W LED Grow Light

Features:

Grow Light Science LED grow light is a full cycle overhead lighting solution for commercial or residential plants cultivation. The 850’s form factor allows for expandability and multiple grow room and grow tent configurations where photosynthesis and yield maximization are the goals. PROGROW 850 provides high PPFD levels and can be used with CO2 supplements. Top light output (PPF), spectral distribution and efficacy will deliver amazing results with little impact on your wallet. PROGROW 850 will deliver PPFD levels of over 1,400 umols/m2/s, either individually or in arrays of multiple cells. We recommend that all growers conduct research and trials within their growing space to design the best combination of inputs.

Things to Consider When Buying LED Grow Light

PPFD
As an important measure index, PPFD measures the number of photosynthetic photons falling on the surface of your plant per second, which is measured in micromoles/square meter/sec — umol/m2/s. It is not difficult to understand that the higher the PPFD value of a grow light, the more light your plants will absorb. Generally speaking, LED grow lights on the market will post PPFD charts on their selling page measured on the basis of different hanging heights or different light intensities. At the same time, a uniform PPFD helps plants receive light from grow lights more fully, thereby providing better yield. Therefore, you can choose the grow light based on the PPFD chart given by the manufacturer.

Diode Brand
As we all know, the diode of grow light is the mainstay that supports its perfect operation. However, the quality of the diode used in the grow lights on the market varies. High-quality grow light diode can ensure that your grow lights keep running efficiently and have a long service life. At present, the brands of grow light diode with a good reputation in the world including Samsung, Osram, Bridgelux, etc. Therefore, when choosing a grow light, you must pay attention to understanding the brand of the diode used in the grow light you wanna buy.

Dimming Function
Compared with HPS lights, LED grow lights consume less power, especially those equipped with a dimming box. You can adjust the light intensity according to the different light requirements by each stage of plant growth, and the dimming range is usually 10%-100%. If your favourite grows light is equipped with a dimming box, then congratulations, you can save an electricity bill from another perspective!

Spectrum
The spectrum of different colours can positively impact the health and nutrient absorption of your plants in a number of ways. However, unlike outdoor growing, indoor growing requires the help of the spectrum in the grow light to provide plants with different lighting needs. This is why it is important to use the correct LED growth spectrum to activate plant responses.

According to research, full-spectrum (mainly blue and red spectrum) grow lights are the best choice for plant growth, blue light helps plants promote their thickness during the growth stage, and red light helps plants stretch and bloom during the flowering stage.

Heat Dissipation
Good heat dissipation can relatively prolong the service life of LED grow lights, and the service life of most high-quality LED grow lights is about 50,000 hours. What are the consequences of poor heat dissipation? First of all, it will affect the luminous efficiency of the grow light, and high temperature will also accelerate the ageing of the internal parts of the grow light, resulting in damage to the inner parts and even interruption of its life.

Therefore, when choosing an LED grow light, you need to pay attention to whether it is equipped with an effective heat dissipation device. For example, some high-quality grow lights are equipped with aluminium heat sinks to increase the heat dissipation area of the grow light and optimize the heat dissipation effect.

Conclusion

Finding the best LED grow lights on the market is no easy task. It took countless hours of research and comparisons — I painstakingly done it, but happily done at your convenience!

If you’re wondering why you don’t see other LED grow light brands or models on my list of the best LED grow lights — it’s not necessarily because they’re bad, but because they’re beat by the ones I’ve included.

In short, I have no doubts that the grow lights I listed above are the best. Cycle through to find the product that’s right for you and be confident you’re making a solid buying choice.

A product can be both excellent and terrible. Sometimes, the terrible product is what we end up with, while other times, the excellent product manages to screw up our lives completely. Seems too surprising, right? But in reality, anything can happen.

So, it’s essential to be careful in every step while purchasing online to ensure you’re getting the best possible option. However, as an ordinary buyer, you may find the whole approach more exhausting in the end.

That’s why we pull together our best Led Grow Light reviews and buying guide to help you make the right choices without any hassle. From checklists of the best products to in-depth reviews, we’ve got you covered. So read on and get ready to make the most of your new purchase!

Benefits Of Led Grow Light For Indoor Plants

When people ask what the benefits of led grow light for indoor plants are, it can make you wonder. There are many benefits of led grow light for indoor plants, but are they great? Let me explain why using led grow light for indoor plants is so great. Similar to how a 5-star hotel is better than one with only 2 stars, using a premium led grow light for indoor plants can mean better results for your needs.

Here are some of the benefits of led grow light for indoor plants:

They offer great designs that will be sure to impress.
Made with the best quality materials, they will last a long time.
They have great customer service available to you whenever you need them.
These can be the answer for those looking for more than just a standard led grow light for indoor plants.
The led grow light for indoor plants is the perfect way to get what you need.
You can find exactly what you need in no time at all.
Great value for the price.
These are a great option for those looking to get their hands on some quality led grow light for indoor plants.
They come with everything you need, including an instruction manual that is easy to understand.
It’s effortless to use and comes with everything you need right out of the box.
The reviewed led grow light for indoor plants made by reputable brands are a great way to get what you need.

Viparspectra KS5000 500W LED Grow Light

Features:

VIPARSPECTRA LED Grow Light uses market-leading Samsung LM301H diodes (3.10 μmol/J) and Osram 660nm diodes, more energy-efficient LEDs that increase crop yields and save operating costs. High-end components give the KS5000 incredible performance. The KS series is designed for individual or commercial growers who want to optimize their growing space for maximum crop yield while producing the highest quality crops. The KS5000 Dimmable Grow Light with Daisy Chain allows you to connect up to 100 KS5000 grow lights to your commercial grow, horizontal and vertical farming, greenhouse grow, pipe grow, hydroponics, 4x4 grow tent. A built-in dimmer allows you to dial in the perfect PPFD for your plants at all growth stages. The KS5000 features a detachable power supply that can be remotely mounted on the side of a rack or on an adjacent wall to dissipate heat from your grow space.

Mars Hydro FC 4800 480W LED Grow Light

Features:

MARS HYDRO LED Grow Light features 2016 Samsung LM301B and Osram 660nm diodes with an incredible efficiency of 2.85 µmol/J Maximum yield of 2.5g per watt, 30% higher average PPFD, higher yield and quality compared to older lights 50%! High yielding full cycle growth of 3x3 feet using only 480W of perfect light. It’s perfect for commercial LED grow lights, the FC4800 dimmable grow light with daisy chain allows you to connect up to 30 Mars grow lights to your commercial grow, horizontal and vertical farming, greenhouse grow, pipe grow, Hydroponics. Great for Mars Hydro 4x4grow tents that grow throughout the cycle. This LED grow light has a high intensity spectrum with enhanced red color (3200–4200K, 4800–5000k, 650–665nm), perfect for vegetable blooms, adapting to every stage of the plant cycle. The dimmer knob is ideal for growers to adjust light intensity for different growth stages.

Led Grow Light Buying Guide

We’ll discuss the decisive factors here to help you understand how to choose the best Led Grow Light.

Product Durability
A less durable Led Grow Light can cause financial annoyance that you’ll want to avoid. So durability is a top priority when choosing products other than non-durable/convenience goods. If you buy a durable product, it’s supposed to last more and provide excellent value for money. But how do you know a product is durable?

First find, what’s the most durable material in the category. If you’re buying a household product, choose a nonbreakable material like stainless steel, laminated glass, or polycarbonate plastic. See if the product features include scratch or wear resistance, as they can keep economic value for years. Also, ensure the product goes through proper quality testing by looking at its certifications.

Ease of Use
Now consumers want less hassle using a product. So every product is made keeping in mind the convenience and ease of use. A product that’s easy to install, master, and maintain is what you should look for. You won’t want to hire a professional or technician to get started with a product. Anything that allows DIY could be a great choice.

Also, consider the convenience regarding maintenance, storage, or transportability. You can check out features like ease of cleaning, compact footprint, or foldability, as they’ll provide excellent ease of use.

Features & USP
This is what you consider the most while buying the Led Grow Light. Features are objective attributes that must have a specific value to fulfill your requirement. So you’ve to consider features thinking how they could benefit you, like you can choose a particular product color or shape to uplift your decor.

Economical Aspects
Cost is a significant variable when buying a product, like the Led Grow Light. Sometimes you only look at the upfront purchase cost, but you must also check whether the product has an additional cost. It may not include an essential element, which you may need to buy separately, like a battery in an inverter. Or, it could require an additional installation cost.

On the contrary, some products could offer a DIY setup or include everything in the package. So check out all the economic aspects before you buy the product. Also, check whether the product consists of additional maintenance costs.

Tips for Growing Healthy Houseplants Using Grow Lights

If you want to grow healthy indoor plants, using grow lights is a great way to ensure they get the light they need to thrive. Here are some tips and tricks for growing healthy plants with grow lights:

1. Place the grow light as close to the plant as possible. This will ensure the plants get as much light as possible and help them grow healthy and strong.

2. Make sure to rotate your plants regularly. This will ensure all sides of the plant get the light they need for even growth.

3. If you use fluorescent grow lights, be sure to change the bulbs every few months. This will ensure that plants get the full spectrum light they need to grow healthy and strong.

4. Be sure to give your plants plenty of water. This will help them absorb light and become healthy and strong.

5. Be sure to monitor your plants regularly. This will help you spot any problems early and allow you to take corrective action to ensure your plants stay healthy.

By following these tips and tricks, you can be sure your plants will get the light they need to grow healthy and strong.

Conclusion

If you want to grow healthy indoor plants, using grow lights is a great way to make sure they get the light they need. By following these simple tips, you can easily set up your own growing light system and give your plants the light they need to thrive.

Grow lights are a useful option for gardeners who don’t have the space or climate to grow plants in natural sunlight.

Whether you don’t have a yard or it doesn’t receive much sunlight, you can use one or more grow lights to grow plants indoors. The light from a grow light replaces or supplements sunlight to help your plants stay healthy. To help you select a light, we researched the best grow lights. Keep reading!

What makes a Good LED Grow Light?

Different plants have different needs for light at different growth stages. There are some indicators of a good LED grow light fixture:

1. Uniformity of illumination
Illumination uniformity means the percentage of minimum to average illuminance on a particular surface. Higher uniformity of light distribution will allow better illuminance and a more comfortable visual experience.

Different types of plants require different uniformity of light. There are two indicators you can refer to find a qualified lamp. They are the uniformity between plants and regional uniformity. You’ll need to achieve 95% or even more than 98% of these indicators.

In addition, the uniformity of the spectral distribution is also a vital point that you cannot ignore. These indicators have a pivotal position on optical design and plant lighting design.

2. The rationality of light quality combination
Light is the leading environmental factor for plant growth and development. That is why light quality is one of the vital conditions influencing plant photosynthesis.

Light quality can also be viewed as the wavelength of light. It controls photosynthesis as an energy source, where different light qualities trigger different photoreceptors.

Indoor plants will get impacted in several ways by light quality combinations. For instance, their photosynthetic characteristics, stress resistance, and senescence.

3. Reliability of heat dissipation
LED grow light with better heat dissipation will allow the temperature to rise slower. It is also crucial to find those lights with proper cooling systems.

Even with excellent heat dissipation LED grow light, botanists should also be cautious using it. You must ensure appropriate distancing between LED grow lights and your indoor plants. Otherwise, overheating could burn your indoor plants.

4. Waterproof, dustproof, and corrosion resistant
Durability is another crucial factor in making quality LED grow light. Lights made from quality materials with high industry standards could work for about 10 years. They can ensure corrosion and allow you to save hassles and operation costs.

You should also consider buying from LED grow light manufacturers who ensure quality and warranty. A good LED grow light should be waterproof, dustproof, and weather-resistant. It ensures that it does not spoil despite frequent plant watering and ever-changing weather. These LED grow lights will also work over a long time with easy maintenance.

5. Suitability of power
An excellent LED grow light should also be made with suitable power. It should be with low power consumption and low heat generation, yet powerful enough. You’ll also need to ensure that it works with safe low-voltage to prevent fire hazards.

Besides, you should also consider the PAR values and Photosynthesis Photon Flux Density. They measure the amount of light from the LED grow lights received by your indoor plants.

6. Visual Comfortability
It is also crucial to consider the visual comfortability of a LED grow light. A good LED grow light should eliminate glare during the daily maintenance of your indoor garden. You’ll experience lesser visual fatigue and sublime visual effects with these LED grow lights.

ECO Farm DBL5000 Full Spectrum LED Grow Light 480W

Features:

With 1296 pcs SAMSUNG LM281B diodes, ECO Farm Led grow lights draw 480 watts achieving an impressive PPE of 2.5 umol/J, coverage for 4'x4′ of high-yielding full-cycle growth. with a smaller footprint for better crop quality, more cost-effective. 4x4ft for personal grow, 3x3ft for commercial grow. Built-in removable bars interval & disability enable the exact dynamic PPFD control over each of plant growing stages. Easy dimming & daisy chain max up to 15 lights, IP65 Waterproof, master light easily controlled, making it a high-performance commercial grow light for enormous yields. Also perfectly suit full-cycle hydroponic, soil, grow tent/room growing. 

Slim 500S Dimmable LED Grow Lights 3500k

Features:

The Slim 500S Dimmable LED Grow Light is a top of the line LED Fixture that is sure to amaze. This all aluminum fixture is lightweight, sleek, and built to provide maximum passive cooling capabilities for the Optic Double Row LED Strips. It is powered by a “Best in Class” Meanwell Dimmable Driver, giving you many years of reliability and top of the line efficiency. Samsung’s horticulture specific LM301H white LEDs are in the class of “Most Efficient” from Samsung and they go through a special lens treatment to stand up to high humidity environments.

Factors to Consider When Comparing Grow Lights

When it comes to indoor growing, you need to mimic the same plants being grown outside. Plants have evolved to survive outdoors, and they have adapted over time to thrive in their native environments.

This includes replicating the lighting the plant prefers. This is one of the critical factors of a successful indoor garden, so you must understand how lighting impacts growth and development.

Light Intensity
Light intensity can be defined as the amount of energy a light source releases per unit area. The most common measurements for lighting intensity are PAR, PPF, and PPFD.

Photosynthetic Active Radiation (PAR) describes the part of the light spectrum that plants use for photosynthesis, which ranges from 400–700 nanometers.

Photosynthetic Photon Flux (PPF) describes how much visible light is being emitted. This is measured in micromoles per second.

Photosynthetic Photon Flux Density (PPFD) describes how much visible light is being emitted given a specific area. This is measured in micromoles per square meter per second.

Keep in mind that the way various plant species respond differently to spectral radiations and intensities also depends on growing conditions. It is imperative that you provide the right environment coupled with the proper light intensity for the crop you are growing.

Wattage
The total wattage of a grow light can sometimes be mistaken as an indicator of how powerful a light will be. Instead, look for the light’s PPF rating to determine how much light it will produce. Knowing a fixture’s wattage is important for calculating energy requirements, however, as it is a measurement of how much electricity the light fixture takes in.

Additionally, you will need to know the wattage for each fixture to size proper sensible load factors to maintain the optimum grow environment. More watts equal more BTUs increasing sensible loads and increasing the amount of HVAC needed to maintain proper temperatures.

Distance
Height and beam angle are a key part of determining how to mount your lights for optimal performance. The goal here is to minimize light loss while maximizing PPFD.

For example, if you were to shine a flashlight at a wall near you, you would see a small, clearly defined circular light. However, if you began to back away from the wall, the light would become less intense and larger as you moved away. If you were to shine multiple flashlights at the wall, you would see the lights overlapping at a certain distance from the wall, in which the overlapping areas would appear brighter than the rest of the illuminated areas.

This represents what occurs on the plant canopy in a grow room. Work with your lighting provider to properly plan your lighting layout to best maximize your lighting intensity.

Color Spectrum
Color plays an essential role in the growth of indoor plants. The spectrum of light that a plant receives directly affects the rate of photosynthesis and the quantity of chlorophyll produced by the plant.

Sunlight contains the complete spectrum of light including all colors of the rainbow: red through yellow to blue and violet. Like plants growing outdoors in the sunlight, indoor plants grow best under full-spectrum bulbs, which produce a balance of cool and warm light that replicates the natural solar spectrum.

The color spectrum is measured in nanometers (nm), which is one-billionth of a meter. The visible color spectrum ranges from roughly 380 nanometers (violet) to 740 nm (red). The wavelengths between these two ends are infrared and ultraviolet, neither of which is visible to humans.

The colors within the visible light spectrum have different effects on plant growth. Blue stimulates plant growth. Green and white light help with canopy penetration and make it easier for the human eye to spot symptoms of disorders and disease. Red is the most efficient energy source and plays the most important role in photosynthesis.

Conclusion

Are you a gardener looking to grow plants in enclosed spaces? Do you live in an area where outdoor plant growth and production is not possible? Too hot or too cold outside to grow plants at home? If you’re the one who thinks about these issues and faces them, you don’t need to worry. Yes, there is no need to worry about these issues as using grow lights can be a great help for growing plants in enclosed areas. According to reviews, billions of users are satisfied with growing houseplants and vegetables with grow lights and best full spectrum LED grow lights.

Plants need light for photosynthesis, growth, development and production. Inappropriate exposure and exposure of plants to sunlight can significantly reduce plant growth and development. Gardeners can easily get more growth and better yields by using grow lights correctly based on plant needs and the type of grow lights.

Solar energy brings us many benefits. Various organisms can obtain nutrients from sunlight. Even if we love its presence, we can only hope to prolong its stay, especially in cold weather or winter. That’s why, as a gardener, you must have the best plant lights in order to maximize your wonderful plants. This, combined with the most powerful source of natural light, will allow your plants to bloom and continue to set fruit faster.

When to Use Grow Lights for Indoor Plants

If your plants stay indoors all the time, grow lights can help year-round. They will ensure that your plants always get enough light to thrive.

You may decide to only use grow lights for your houseplants for part of the year. If so, then it’s best to use them in winter. With shorter days at this time of year, grow lights will help make up for the reduced sunlight.

But if you have outdoor plants, you can still use grow lights to your advantage. For example, if you’re growing an outdoor garden in the spring, indoor grow lights are a great way to get your plants indoors first, since it’s too cold to keep them outside. Then, when the weather warms up and the risk of nighttime frosts disappears, your health plan will be ready to transplant to the outside garden.

Spectrum King Phoenix 340W LED Grow light

Features:

Spectrum King grow light is the most efficient LED light fixture on the market with a dedicated plant spectrum. SK Cryo-Therm cooling technology enables ultra-thin profiles, maximizes airflow and minimizes microclimates. It has unmatched performance and reliability in its class. It is optimized for single or multi-level planting near the canopy. The Spectrum King Phoenix 340W Veg sets a new benchmark for what’s possible with grow lights. The full spectrum is ideal for most light-loving plant seedlings, vegetation and the entire growth stage of flowering. IP65 waterproof horticultural lighting system, can be used in humid or water vapor environment, easy to use, plug and play.

Mars Hydro FC-E 3000 300W LED Grow Light

Features:

This Mars Hydro LED grow light with 1184pcs BridgeLux Diodes & Meanwell Driver, market-leading PPF 2.7 µmol/J, Max 2.5g yield/watt with 30% higher Average PPE, more cost-effective compared with other same type lights.Only consumes 300W, perfectly cover 3x3ft (personal), 2.5x2.5ft (commercial) grow space. Built-in removable bars interval & disability enable the exact & dynamic PPFD control over each of the plant growing stages, FC-E3000 detachable bars deliver highly uniform adjustable, PPFD levels throughout the plant canopy, best for more uniform Density Buds. Real Aluminum heatsink together with 4 slim profile passively cooled bars (THINNER & LARGER surface) and detachable Meanwell Driver, create less heat, save 50% energy than other old grow lights.

What to Look for in an LED Grow Light: Three Key Points

When it comes to LED grow lights, the three most important things are the basis of your choice:

the type of plant you are growing
The size of your room to grow
Types of LED Grow Lights

Plant type
This is the most important thing to know. You must determine the correct LED grow light for the specific plant you are growing. Different plants require different LED grow lights. Some plants require stronger light, while others require more blue light than red light. Again, it depends on your plant’s needs.

An example of this is flowering plants. These plants need a low spectrum so the flowers don’t burn. Additionally, green and leafy vegetables require a high spectrum, a balance of red and blue light, for healthier leaves. The effectiveness of your LED grow light use will depend on you choosing the right light for your plants.

Note that almost all LED grow lights can help plants grow at any stage, be it seedlings or fully mature plants, so there is no problem with the age of the plants.

Size of growth space
The size of your growing space or houseplant space will tell you how many LED lights to buy. LED grow lights come in different shapes, sizes, and colors, so you can’t buy lights that are too small or too big on a whim that could damage your plants.

A good default measurement is 32 watts per square foot of grow space. If you have a large growing space, then you should buy more lights. You should also consider the location of the planting space. Do your plants only come in one box? Are they in pots? If this is the case, specific LED grow lights can also be purchased.

Types of LED Grow Lights
There are also different types of LED grow lights for specific purposes. Here are some suggestions:

To grow seedlings into complete plants, you should use full-cycle LED grow lights.
For vegetables or flowers, you can use single-channel lights or lights with two channels (including vegetable or bloom modes). Programmable lamps can also be used.
As for the shape of the lamp, it also depends on the type of plant and the growing space, such as:

Paneled LED grow lights are best for growing vegetables because the growing space is usually straight, or the vegetables are lined up.
Bulbs LED grow lights are often used for herbs or potted plants.

Conclusion

Hopefully, this article has been able to shed some light ( pun intended ) on how to pick the best LED grow light for your project.

As long as you know the size of your grow space and how many plants you want to grow, choosing an LED grow light is pretty simple.

Good luck with your grow!

When gardening in enclosed spaces, you must rely on other light sources. LED grow lights are perfect if you decide you want a garden but don’t have outdoor space. These indoor grow lights allow you to create a plant-friendly environment that allows you to be the gardener you’ve always wanted to be.

But choosing the right light for your specific growth needs can be difficult. LED grow lights all work by providing different types of light that provide the same benefits as sunlight, but they all have unique features to consider. Whether you want to grow succulents in your bedroom or a full range of vegetables in your kitchen, there are a variety of grow lights to meet your specific needs.

Which LED grow light to choose?

Adequate light is essential for indoor growth. With so many types of grow lights on the market, such as LED grow lights, HIDs, and fluorescent lights, which one should you choose? This is a headache for many novice growers. For this question, the answer we give is undoubtedly LED plant lights.

Compared with other types of lamps, it saves electricity, has good heat dissipation and is cost-effective.

Spider Farmer G860W Full Spectrum LED Grow Light

Features:

This Spider Farmer LED Grow Light features an even peripheral PPFD score for even coverage, ensuring maximum light per plant. The elongated light bar design also ensures a more even distribution of light, reaching all edges and corners. The strip grow light design and the aluminium heatsink on the back contribute to better airflow and good heat dissipation. The G860W Garden Light features a detachable driver and 6.56" long power cord to reduce ambient heat in the grow space for longer life. The LED diodes are coated with water repellent, so they are not afraid of a wet environment. Dimming daisy-chaining allows you to link up to 60 G680W Series grow lights together — dimming multiple lights simultaneously. Widely used in commercial cultivation, vertical farming, home gardens, home cultivation, CO2 systems and hydroponics.

Spectrum King Phoenix 840W LED Grow Light

Features:

Spectrum King’s Phoenix 840W is ideal for photon-hungry crops that can handle strong light. With 16% less wall power than standard HPS fixtures, the 840 provides some decent output compared to other fixtures while still saving electricity and heat. Spectrum King’s custom spectrum is tested and customized to maximize plant and flowering cycle growth. The intensity of this dimmable light can be as low as 10%, enabling growers to simulate a sunrise/sunset effect. Spectrum King’s innovative Cryo-Therm cooling technology features an ultra-thin profile that maximizes airflow and minimizes microclimates. The Phoenix 840 grow light is optimized for single or multi-level planting close to the canopy.

Things to Consider Before Buying Grow Lights

Grow lights are meant to help your plants grow strong and healthy, so it’s important to have a good understanding of what to look for before choosing a product for your setup. Consider the brightness of the light, the light spectrum that each product can produce, and the type of grow light that would be best for the size and configuration of your grow tent.

Brightness
In most circumstances the brightness of a light would be measured in lumens. However, lumens can only be used to measure visible light. Plants are capable of absorbing a wider spectrum of light for photosynthesis, which is known as the photosynthetically active radiation (PAR) zone. So, the PPF and PPFD are required to adequately measure the brightness of a grow light.

– PPF is the standard measurement used for determining the amount of light within the PAR zone created by a single light source per second. Grow light manufacturers measure PPF in micromoles per second (μmol/second). In general, grow lights with a high PPF value are considered more effective, especially if the lights can be dimmed to reduce light when necessary.

– PPFD is the preferred measurement when you know the size of the area where the light will be set up. The PPFD indicates the amount of light within the PAR zone that will actually reach the plants or fall within a given surface area each second. Grow light manufacturers will sometimes provide the PPFD, though it’s important to note the size of the tent or room where the PPFD was set — otherwise, the measurement isn’t as useful for determining the actual output. PPFD is typically measured in micromoles per meter squared per second (μmol/m²/s).

Light Spectrum
Natural light from the sun has a spectrum of waves that includes blue light, purple light, red light, indigo light, infrared light, and more. Plants are exposed to the full spectrum when they grow outdoors, but for indoor setups, you will need to consider light spectrum when choosing the best grow lights. Certain colors are more important for your plants’ growth than others, so it’s common to see grow lights that offer full spectrum white lights as well as others that feature a series of colored lights to better control the plant’s various growth stages.

– Blue light is essential for plants to grow from seedlings because it’s the first color on the light spectrum that can be absorbed by plants when they are still in a vegetative state. It’s also necessary throughout the remainder of the plant’s life to help with photosynthesis, leaf expansion, photoperiodic flowering, and leaf curvature towards light.

– Purple light isn’t as important as blue light, but it can improve photosynthetic processes, especially when the plants are young. Adding purple light at later stages doesn’t harm plants, but the effects of this light decline as most plants mature.

– Red light is another key light on the spectrum for healthy plant growth. It can be used to help seedlings sprout and grow, but the effects of red light aren’t really noticeable until the later stages of growth and budding. Both blue and red light are the most important for growing healthy plants.

– White light is the easiest option to go with, especially for beginner growers, because it contains every color on the spectrum. For this reason, white lights are typically referred to as full spectrum lights by manufacturers. White lights encourage growth throughout the entire plant life cycle, but experienced growers may prefer the precise balance and control over plant development that they can achieve with blue, purple, and red spectrum lights.

Conclusion

Having LED grow lights enables you to bring your favorite herbs, flowers and plants indoors. It’s convenient, and you have complete flexibility in what you can plant. With so many different price points of lights, your decision really comes down to personal preference, what you want to grow and where you want to grow. Once you know the type of grow light that is best for your plants and space, you can start growing indoors.

Full Spectrum LED grow lights are one of the most advanced types of grow lights available.

These lights produce the highest PAR of any light source.

LED grow lights generally contain a heat sink and built-in fans. They also work well in humid environments because they have constant direct current.

If you have been looking for the perfect way to keep succulents and other houseplants alive during the winter, consider growing them under grow lights.

These grow lights plug into an electrical outlet and can be adjusted according to the plant’s needs.

Grow lights are particularly helpful when germinating seeds.

A grow light is basically a bright light that is designed to provide specific light for your plants.

It is important to note that these lights can be very powerful, though, and may emit some harmful light.

So you should always pick the right ones.

What does full spectrum mean?

Technically, full spectrum light would include all wavelengths of light emitted from the sun — this would include all wavelengths of visible and invisible (ultraviolet and infrared) light.

Plants use only part of the visible spectrum for photosynthesis. The portion of visible light that plants use for photosynthesis is called PAR, so for grow light, “full spectrum” simply means that the light emitted covers most of the PAR range.

While our eyes are most sensitive in the middle of this range, plants are more sensitive to the end of the visible spectrum. Plants contain chlorophyll and other pigments that absorb specific wavelengths of light. By absorbing energy at wavelengths of light, they can generate energy to boost plant growth.

Full Spectrum LED Grow Light: Why They’re The Best

When shopping for LED grow lights, we have one recommendation: go full-spectrum. Full-spectrum LEDs are the closest thing to natural sunlight, meaning your plants get all the wavelengths of light they require for a full grow cycle. When growing indoors, they allow your plants to be as high-yielding and healthy as they can be.

Now that you know why LED lights, especially full-spectrum LEDs, are the best for indoor plants, picking out the best one for your grow won’t be nearly as hard. Whether it’s a closet grow or you’re working with a single plant, or, money is tight, and you need something affordable, we’ve compiled a list of the best LED grow lights to suit a variety of plants, budgets, and spaces:

HLG 200 Diablo 200W Quantum Board LED grow light

Features:

This HLG grow light is a 200W quantum board LED grow light, powered with the custom QB648, a LED Module designed by Horticulture Lighting Group®. Each board has 648pc Full Spectrum LM301H LED’s and 18 pc Deep Red 660nm LM351H leds that is ideal for Veg and Bloom. The QB648 Diablo has the highest quality and efficiency in the Quantum Board® line. This grow light is designed for low ceiling heights or vertical racksand it has a reliable passive-cooled design. Better canopy light penetration with diffused light. It produces mild heat, but ambient heat around this light is very low, so there is no need to worry about burns or damage to your plant; you can place the lamp directly above your plants.

King Plus UL Series 2000W LED Quantum Board

Features:

King LED developed the most efficient and safe Quantum Grow Light, using SAMSUNG chip (2.8 umol / J, more energy efficient and brighter), compared with the traditional LED LIGHT, HPS, while providing efficient lighting, the actual power is only 223w, high-quality products bring lower electricity billhigh-quality products bring the highest cost-effective. No fan No noise, the structure is more simple, lightweight, easy to install, cable special protective cover, waterproof LED pancel, far below the traditional LED lamp operating temperature, so that its service life is extended by 100%, high-quality products bring longer lifespan. Blue,White,Red and IR (660–665nm,3000K,5000K and IR 760nm), provide all the spectrum needed for plant growth, let your plants thrive, high-quality products bring higher yield

What are the best characteristics of indoor LED grow lights?

Don’t block the sun! — Choosing the Right LED Grow Lights​
Ironically, the biggest problem associated with greenhouse LED grow lights is that they don’t block much natural sunlight. Yes, supplemental LEDs can provide a lot of plants, but they should never steal the show.

What is the ideal LED spectrum for a indoor plant?​​​
In general, greenhouse growers are better off using LEDs that have a broad spectrum of light waves. Because of the wide wavelength range of these lights, they offer growers the option of completely replacing sunlight during dark seasons and extending daily lighting hours. Additionally, these full-spectrum LED grow lights can be used as supplemental lights for spring-to-fall cycles.

While a broad spectrum is ideal for most greenhouse growers, in some cases you may only need a narrow spectrum. You’ll need to evaluate your growing goals to determine which spectrum is best for your growing strategy.

Look for enough light transmittance
A key reason people use LED grow lights is to put extra light on each potential bud site. The primary cola of the plant will usually take up all the sunlight and block the bud bits near the bottom. Targeted LED grow lights are a great tool for adding light.

While the LEDs are in place, not worrying that the lower buds won’t get more light than the “popcorn” size needs, making sure your LED grow lights have excellent light transmission is probably the easiest way to go. When the light intensity and spectrum are specifically designed, LED grow lights can penetrate most foliage and bring PPFD deeper into the canopy. Ideally, your LEDs should have high concentrations of IR and blue wavelengths to improve photosynthesis.

Looking for dimmable features​
A good greenhouse LED should have dimmability and excellent light transmission. Remember: A key reason you add LED grow lights to your greenhouse is for extra control. Without a reliable dimmer, you can’t control the interior of your greenhouse.

With responsive dimmer controls, you can adjust the light intensity according to the conditions of the day. Farmers can also match their recommended Daily Light Integral (DLI) without the need for additional labor to move the lights.

Notes on heat dissipation​
Unlike other indoor growing spaces, greenhouse temperatures fluctuate widely. Extra sunlight during the day will raise the temperature, while no sunlight at night will make your room colder. While growers have many tools at their disposal to control the temperature and humidity in their greenhouses, the high amount of heat from grow lights can still add to thermal management costs.

Growers should focus on LED grow lights that don’t interfere with their well-calibrated temperature and humidity settings. Also, poor quality LED grow lights can damage sensitive buds from overheating if you’re not careful.

Thankfully, LEDs are generally not as “hot” as HPS bulbs. LEDs with heat sinks avoid heat build-up that can damage crops and lights.

When reviewing LED grow lights, growers should review any ambient temperature issues. Facts have proved that the LED grow light with thick passive heat sink has good heat dissipation effect and convenient light maintenance. This is an essential feature of any commercial greenhouse lighting.

Conclusion

In general, vegetables and fruits require grow lights, while most common houseplants do not. Indoor plants that most people grow are popular because they have low lighting requirements, are less fussy about watering, and are the easiest and hardest plants to grow.

If you think about it, when you grow edible plants for food, you place higher demands on them. Indoor plants just want to sit and look pretty. On the other hand, if you grow plants for food, you want them to bear fruit quickly or grow new leaves. They need some light to do this!

Therefore, that is why we recommend some great led grow lights for you.

Growing plants seems like an easy way to get yourself in, especially if you think you have a “passion for smoking.” But it’s far more complicated than you might think. Growing plants is not a hobby, but a way of life.

Proper research is one of the keys to a healthy environment for your plants. From the planning stage, to execution, and even after the harvest part does not stop. Cultivation is a continuous cycle made possible through dedication. From choosing the best plants strain for your region and weather, to buying the best equipment, such as the best LED grow lights for your plants.

Fortunately, for aspiring and hobbyist people like you, research is made easy. We’re here to help you when it comes to finding the best LED grow lights for you.

Light Emitting Diodes or LEDs are the perfect planting technology to mimic sunlight. It helps produce a great product and doesn’t require as much energy.

What Makes Grow Lights Good for Growing Houseplants?

There are a few things to look for:

The light should be the correct color. LED grow lights emit a range of colors, but not all of them are good for plants. The best LED grow lights emit a broad spectrum that includes infrared, as these colors are the colors that promote the most growth.
The lights should be bright enough. If the light is too dim, it will have no effect.
The light should be concentrated. LED grow lights emit a lot of light, but not all of that light is useful for plants as it can illuminate the walls of the growing area. The best LED grow lights have a lens that focuses the light into a narrow beam. This ensures that more light actually reaches the plant.

SpecGrade LED Verta-6 Eco 640W LED Grow Light

Features:

The modular design of the SpecGrade LED Grow Light allows you to repair any faulty components in the field without experiencing any downtime. A proprietary thermal management system radiates less heat to the plants while providing unprecedented light levels and uniformity. This LED grow light is designed for maximum PPFD while using less power than traditional light sources. The fine-tuned A1 “Full Lifecycle Spectrum” has been proven in universities and a variety of growing environments to improve tricolor and taste while reducing operating costs and shortening grow cycles. SpecGrade’s Grow-Connect is an easy-to-install daisy-chain cabling solution for wet locations in growing facilities. Multiple grow lights can be connected together in a plug-and-play sequence starting from the power source. This solution will greatly reduce installation costs and even allow you to quickly reconfigure your system without having to call an electrician.

RayonLED GLMF-640W FOLDABLE LED Grow Light

Features:

This Rayonled LED grow light has everything to appeal to hobby and commercial growers with its impressive expertise in LED technology. The GLMF640 is designed to replace and exceed the results of 1000W HID luminaires. From spectrum to certification, it’s engineered to compete with the top grow lights on the market. With a high output of 1,728 μmol PAR and impressive efficacy of 2.7 μmol/J/W, this grow light bar provides full spectrum, broad coverage light for long-term growth. IP65 certification allows the light to function and last in even the wettest grow rooms. And independent strips and drivers ensure that even if something goes wrong, the lights can be repaired without losing production of the entire fixture.

Things You Must Look For When Choosing LED Grow Lights

Thanks to advancements in technology, we now have LED grow lights that are more competitive compared to traditional grow lights from HPS or CMH.

There are several factors to consider if you want to invest in led grow light.

Let’s take a deeper look at these factors and determine why they are important when choosing LED grow lights.

High PPF
PPF is the term used to define the measurement of PAR. This can help you determine exactly how much light your grow lighting system produces can be used by plants for photosynthesis.

High PPFD & Even Footprint
PPFD is a density measurement which is expressed as micromoles per square meter, and it differs from PPF in that PPF is only micromoles per second, but PPFD is micromoles per second per square meter. This is because we want to know how many photosynthetic photons fall on a square meter per second.

A grow light may have a good PPFD two feet above the center of the light, if the lights on the sides are much lower, you’ll get a big gain in the center, but a steep drop off on the sides.

High Efficacy
Efficacy measures how efficiently a light converts power (watts) into light. The higher the efficacy, the better. Higher power efficiency allows you to save on electricity bills without sacrificing light output.

Full-Spectrum Light
A full-spectrum LED grow light means your grow light closely resembles light from the sun. This helps maximize full plant growth by including all colors (wavelengths) of light, as each color All contribute to different aspects of plant growth.

Conclusion

With a huge selection of grow lights on the market today, anyone growing houseplants can easily design a setup that not only helps the plants grow healthily but also looks great. Thanks for reading!

We have seen great progress in LED grow lights over the past 3 years. They are more affordable than ever and we are spoiled! In this article, we’ll provide our top picks for the best LED grow lights.

Advantages of LED Grow Lights

After knowing what LED grow lights are, you should know the advantages of LED lights. This will help you consider them before buying.

1. Long life and low cost
The best LED grow lights last up to 50,000 hours, so you don’t have to change your lights too often or worry about damaging your grow lights. This means that when you choose LED lights for planting, there is usually no problem with three to five years of use. Longer service life means lower maintenance costs.

2. Energy saving
LED lights are very efficient and produce less energy consumption for the same lighting effect. This is a good thing for your electricity bill.

3. Safety
LED grow lights work at low temperatures and emit very little heat. This greatly improves security.

4. Environmentally friendly
LED lights for planting are undoubtedly green and environmentally friendly. LED lamps do not contain elements that pollute the environment such as mercury and lead, and do not emit ultraviolet or infrared rays that pose a threat to human health.

5. Adjust the wavelength of light
One of the great benefits of LED grow lights over other grow lights is that you can adjust the wavelength of the light. LED lights for growing provide the spectrum that plants need, not too much or too little. This greatly promotes the growth of plants. At the same time, there is no problem of wasting energy.

6. Full Spectrum LED Grow Light
LED full-spectrum grow lights are full-spectrum artificial light sources that produce light beams that are optimal for plant growth. The best full-spectrum LED grow lights don’t just produce red and blue light, they can also give your plants any light they need. In addition, you can freely adjust the wavelength according to the situation.

7. Low working temperature
LED grow lights run cooler and emit less heat than other lights. This is an excellent advantage for indoor growing.

8. Fast harvest cycle
If you choose the best LED grow lights for your indoor plants, it means you have the freedom to decide how long you want to light your plants. Adequate light can increase the growth rate of plants. As a result, you get fast harvest cycles and can significantly increase yields.

9. No bulky ballasts or reflectors
Generally, fluorescent lamps and mercury lamps with negative resistance gases require ballasts. The role of the ballast is to drive and limit current at high voltage, and LED lights require DC power rather than high voltage power. Therefore, LED grow lights do not require ballasts. You can put them in normal lights without any problems. Since LED grow lights have their own reflectors, no additional reflectors are required.

ECO Farm ECOD Samsung UV+ IR 640W Dimmable LED Grow Light

Features:

The ECO Farm LED grow light provides more higher PAR/LUMEN output, it can reduce the amount of electricity needed to grow plants and minimize the heat output, which can keep the grow room in the desired temperature range of 72–88 ℉.The grow light has a power draw of 640W (consumes 0.64 Kw per hour).The average price in the USA is $0.13/kWh,The per hour cost to operate this grow light is $0.08,which can save a lot of money. This LED grow light has high-energy efficiency with 2.8 umol/J,The 1514 μmol/(m2·s) can provides high-intensity full spectrum light for your plants,The 6 bar configuration helps to provide more even coverage accross your tent.

Grow Light Science PROGROW 640 LED Grow Light

Features:

PROGROW 640 is a full cycle overhead lighting solution for commercial or residential plants cultivation. The 640’s form factor allows for expandability and multiple grow room and grow tent configurations where photosynthesis and yield maximization are the goals. PROGROW 640 provides high PPFD levels with or without CO2 supplementation. Top light output (PPF), spectral distribution and efficacy will deliver amazing results with little impact on your wallet. PROGROW 640 will deliver PPFD levels of over 1,000 umols/m2/s, either individually or in arrays of multiple cells. We recommend that all growers conduct research and trials within their growing space to design the best combination of inputs.

What to Consider When Buying LED Grow Lights

Spectrum
Just as you’ve heard that the sun has an electromagnetic spectrum, the same principle applies to LED lights. You should be aware of several different color frequencies: blue, violet, red, and white. Certain lights are more ideal for certain plant growth stages.

For example, blue light aids in the synthesis of chlorophyll, while red light is great for flowering. You should look for the type of light each grow light provides. Even if a product is considered “full spectrum”, you can see exactly how many lights it has for each frequency.

Brightness
There are two different approaches in terms of light intensity. The first is Photosynthetic Photon Flux (PPF) or Photosynthetic Photon Flux Density (PPFD). This is important because it tells us how much light the plants are absorbing from LED grow lights. When researching your grow lights, cross-reference how much light your plants need versus the intensity of your PPF or PPFD. Another angle comes from lumens, which measure how much visible light the grow light ignores.

How long do LED grow lights last?

The lifespan of LED grow lights depends on the type of light. Smaller standard LED grow lights will last about 30,000 to 50,000 hours. More powerful LED grow lights have an average lifespan of 100,000 hours. Also, many brands offer warranties so that when your light needs to be replaced, it will be covered. Most of these types of lights may require replacement parts in about a year or so.

Conclusion

We all know that making the right choice when buying LED grow lights is a daunting task as you are exposed to a wide variety of products, but here you will find that we have collected the best and most reliable LED plants for you lamp .

It’s a known fact that you can’t buy every single one just to try it out, but you should know that whatever choice you make, you’re guaranteed the best light performance and excellent yield.

Choosing between super simple or advanced options is the most important decision when shopping for a quality grow light.

Premium products are for those who need a premium feel and convenience when using the product.

In our ever-evolving technological world, we all have many new products at our disposal today. We’ve listed the best grow lights so you can keep everything on track. We can help you find the best product for your needs.

Grow light usage

Grow lights are used for indoor gardening, horticulture, plant propagation, and also food production, including indoor hydroponics and aquatic plants. Although the majority of grow lights are used on a commercial level, they can likewise be used in households.

According to the inverse-square law, the intensity of light radiating from a factor source (in this case a bulb) that reaches a surface area is inversely proportional to the square of the surface area’s distance from the source (if an object is two times as far away, it obtains only a quarter the light) which is a major difficulty for indoor growers, and many methods are employed to use light as successfully as possible.

Plants or lights are moved as close together as possible so that they get equal lighting and also that all light coming from the lights falls on the plants instead of on the surrounding spots.

ECO Farm Z6–600 Samsung LM301B LED Grow Light

Features:

This ECO Farm LED grow light has 1632 individual LED’s covering the Samsung LM301B Full Spectrum White Light Diodes, 660nm Red Diodes, IR+UV Diodes on independent controls. our grow lights are ideal for all growth stages. Plus, it works and supports all growth stages such as full bloom and high yield growth. ECO Farm’s high-quality product is a USA brand and constructed to last for years. We use the highest quality materials and back our products with a 5-year warranty. Our top-of-the-line components allow us to stand behind our product for years longer than our competition, making it the best choice for LED Grow Lights. Many growers are switching from the heat-producing HPS lights to our ultra-high performance LED bar lights. ECO Farm LED grow lights utilize the latest technology on the market–from intensive research for optimum performance, to customized spectrums to achieve the highest yields possible.

Omega Luna 630W PRO+ LED Grow Light

Features:

The Omega LED grow lights run about half the cost of standard HPS lights. Not only that, but its life expectancy is a staggering 50,000 hours: more than 11 years for a 12/12 cycle. The Pro+ boasts lower running costs than its predecessor, while the specs will only increase. Each LED strip operates at 2.9 µmol/J but is more powerful than most ceiling lights on the market. The Pro+ is designed to be smaller and lighter than the original, and is just as impressive as its performance. Thanks to the foldable central hinge, the light can be easily stowed away or for the grower to take with him on the go. The Pro+ is dimmable and controller compatible, allowing users to monitor the plant’s environment and make adjustments to keep it in optimal health.

How to Choose the Best Grow Lights for Indoor Plants?

Along with great fertilizers for indoor plants, indoor grow lights can be extremely beneficial for your plants’ growth. When choosing the best products for your plants, always consider the following factors:

Your Needs
Your specific needs will dictate your choice of product. Whether you’re taking care of inexpensive indoor plants or rare ones, researching their light requirements and needs should be your first step in finding the best light for growing plants indoors.

Free Space
Many grow lights are highly portable and easy to install, but some require bigger spaces. Choose a product that’s suitable for your indoor space and that won’t hamper your day-to-day living as you help your plant grow.

Type of Light
Although many grow lights emit a full-spectrum light perfect for any stage of plant growth, some specialize in specific stages, such as flowering or seeding. Make sure the product offers the right type of light for your indoor plant to grow properly. For instance, you don’t want high-intensity to grow lights for low-light indoor plants.

Ease of Setup
The best grow lights for indoor plants are the ones that are easy to install and operate. Depending on the plant size, many of them are hanging lamps or standing on a tripod. Before buying anything, make sure you understand how to correctly install the lights — remember that you’ll also be dealing with electricity, and incorrect installation can be hazardous, especially if you’re a beginner indoor plant grower.

Your Budget
Your budget will also affect your choice of product. Remember that while choosing the best grow light is important, it also shouldn’t break the bank.

Wattage
You don’t want a product that consumes too much electricity while providing mediocre results. Check the wattage of the device before purchasing and go for products that offer high-efficiency lighting.

Light Color and Design
Plants respond to red, blue, and warm indoor plant light in a variety of ways, so make sure the product’s design and light colors are suitable for your indoor plant.

Customer Reviews
Finally, check the product’s reputation with customers who’ve used it firsthand. Pay attention to what they highlight in terms of brightness, energy consumption, and effectiveness in helping plants grow, while taking note of the common complaints they have about the product.

Conclusion

Different types of plants require different color frequencies of light to thrive, so we’ve selected grow lights with full-spectrum LED grow lights as well as alternatives with special color frequencies to meet specific plant needs.

During these shorter winters, with less light coming through your windows, you may wonder if your plants are getting what they need to thrive. While this season’s weaker light may be enough for some houseplants, others need a boost to keep growing. Still others, like garden seedlings and flowering plants, may require more intense light than your home provides.

If you’re considering introducing artificial light into your home, here’s what you need to know.

Why people choose LED over HPS

LED lights are a popular type of grow light for plants, and they can be used all year round to grow plants. LED grow lights produce only low amounts of heat which means they have minimal risk of burning shade cloth or other flammable items in your grow tent.

I personally use LED grow lights for my indoor plants and recommend using them instead of HPS due to the lower heat levels alone.

Since LED lights promote plants growth at lower temperatures, the plants require less water as they’re not at risk of drying out from exposure to high heat.

LED lights are also beneficial from an affordability angle because they can last for 50,000 hours or more, making them an even more economical option than HPS lights if you want to maximize your plants yield.

LED grow lights are not without drawbacks. These lights can cause what’s known as a light burn on your plants, which can cause the plant’s leaves to turn yellow and white. To reduce the risk, ensure that you place your plants about 12–18 inches (30–45 cms) away from the lights.

LED lights are generally better for plants than HPS lights, even though both have pros and cons. When planted underneath LED grow lights alone, plants typically grow abundantly.

ECO Farm ECO D700 700W Samsung LM281B Chip LED Grow Light

Features:

This ECO Farm LED grow light has the highest output of white chip and Osram chip, with high energy efficiency of 2.6 umol/J, PPF 1820 µmol/s, LED grow light provides plants with powerful and high quality light to maximize the Yield. The vegetable footprint is 5 x 5 feet and the flowering footprint is 4 x 4 feet. With an excellent full spectrum (3000K, 5000K, 660nm, 730nm IR, 395nm UV), it can make the light more uniform, truly simulate sunlight, and perfectly meet the entire growth cycle of all plants from seed to harvest, resulting in higher yields. The dimming knob can adjust the light intensity at will (from 0% to 100%), and the daisy chain can be up to 100 units, which easily meets the plant development process, including germination, nutrition, flowering, and fruiting. Foldable for easy placement and portable installation, the adjustable adapter has an RJ45 interface, which can control multiple plant lights in series, which is convenient for you to plant in a large area.

RayonLED GLMF-720W FOLDABLE LED Grow Light

Features:

With its impressive expertise in LED technology, this medical-grade device has everything to appeal to hobby and commercial growers. The RayonLed grow light is designed to replace and surpass the results of 1000W HID fixtures. What’s more, the fixture has a dedicated UV-IR strip that can be controlled independently. From spectrum to certification, it’s engineered to compete with the top grow lights on the market. Passively cooled light bars provide full spectrum, broad coverage light for long-term growth. High output 1944 µmols PAR! and an impressive efficacy of 2.7 µmol/s per watt. The unit features UV and far-red light strips to provide the most complete spectrum on the market today! IP65 certification allows lights to function and last in even the wettest grow rooms

Buying Guide

Are you thinking of purchasing a LED grow light for your commercial plants grow? If so, you’re in the right place. In this guide, we will walk you through everything you need to know before making your purchase.

Types of LED Grow Lights

There are a few different types of LED grow lights on the market. The three most common types are:

1. Panel LED Grow Lights

Panel LED grow lights are the most common type of LED grow light. They are a rectangular panel that typically measures between 2 and 4 square feet. Panel LED grow lights are a good option for small to medium-sized grows.

2. UFO LED Grow Lights

UFO LED grow lights are a type of panel LED grow light that is shaped like a UFO. UFO LED grow lights are a good option for larger grows.

3. Strip LED Grow Lights

Strip LED grow lights are a long, thin strip that typically measures between 1 and 2 feet in length. Strip LED grow lights are a good option for small grows.

What to Look for in a LED Grow Light

When looking for a LED grow light, there are a few things you should keep in mind:

1. Watts

When choosing a LED grow light, you will need to choose a light that has the correct wattage. LED grow lights come in a variety of wattages, so you will need to choose a light that has the correct wattage for your grow.

2. Spectrum

When choosing a LED grow light, you will also need to choose a light that has the correct spectrum for your grow. LED grow lights come in a variety of spectrums, so you will need to choose a light that has the correct spectrum for your plants.

3. Size

When choosing a LED grow light, you will need to choose a light that is the correct size for your grow. LED grow lights come in a variety of sizes, so you will need to choose a light that is the correct size for your grow.

4. Efficiency

When choosing a LED grow light, you will also need to choose a light that is efficient. LED grow lights come in a variety of efficiencies, so you will need to choose a light that is efficient for your grow.

Conclusion

In recent years, the popularity of LED plant lights has continued to increase. Although growers find that the initial investment is higher than HPS, LED grow lights are more efficient in the long run.

LED grow lights are more efficient because they have a wider spectrum, use less energy to produce the same amount of light, provide better uniformity and coverage, last longer, cost less electricity, and reduce heat by 40% % and more importantly provide higher yields and compare quality yields. Thanks for reading!